This 304 stainless steel stock sheet offers exceptional durability and corrosion resistance, making it ideal for fabricating custom enclosures, mounting hardware, and protective elements within electrical and lighting systems.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.737" |
| Length | 14" |
| Width | 40" |
A proven choice for industrial professionals, this 0.737" thick, 14" wide, and 40" long sheet is fabricated from high-grade 304 stainless steel. This austenitic alloy provides excellent resistance to a broad range of corrosive environments, including atmospheric conditions and many organic and inorganic chemicals, crucial for longevity in electrical and lighting installations. Its non-magnetic properties and good formability further enhance its utility for intricate component fabrication and structural support where electrical insulation or shielding is a consideration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris or contaminants. 2. Precisely measure and mark the sheet according to design specifications. 3. Fabricate and install the sheet using appropriate fastening methods (e.g., welding, bolting) ensuring structural integrity and desired functionality.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for stainless steel can lead to work hardening and poor edge quality. | Employ carbide-tipped or high-speed steel cutting tools specifically designed for stainless steel, and maintain proper feed rates and lubrication. |
| Inadequate grounding or bonding when used in electrical enclosures. | Ensure all fabricated components are properly grounded or bonded according to relevant electrical codes and standards to prevent shock hazards. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom electrical enclosure fabrication, Mounting plates for lighting fixtures, Protective shielding for sensitive electrical components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||