This robust 304 stainless steel stock sheet offers superior strength and corrosion resistance. Its substantial dimensions make it ideal for custom fabrication in high-stress pulling and lifting environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.958" |
| Length | 27" |
| Width | 31" |
Built to exacting engineering tolerances, this 0.958" thick stock sheet is fabricated from premium 304 stainless steel, renowned for its excellent tensile strength and resistance to oxidation and corrosion. The precise dimensions of 27" in length and 31" in width ensure consistent performance and predictable behavior in load-bearing scenarios. This material composition is ideal for environments exposed to moisture, chemicals, or extreme temperatures, making it a reliable choice for custom plate fabrication, reinforcement, and structural components within the pulling and lifting industry.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Assess the mounting location for structural integrity and load capacity. 2. Precisely mark and drill mounting holes according to design specifications. 3. Securely fasten the stock sheet using appropriate grade fasteners and torque settings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always utilize fasteners rated for the expected load and compatible with stainless steel to prevent galvanic corrosion. |
| Improper surface preparation leading to stress points. | Ensure all edges are deburred and surfaces are clean before installation to maintain material integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of lifting lugs and brackets, Reinforcement plates for heavy-duty machinery, Base plates for winches and hoisting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||